How to Charge and Position the Reluma Flex Mini Wrap
Quick answer: Charge Mini Wrap with the specified USB arrangement, then place its LED side towards the selected area and fasten it as instructed. Check the supplied manual for charging, placement and session settings.
Explore Reluma Flex Mini Wrap: current details, options and pricing →
By RelumaHealth · Product listing reviewed 1 November 2026; supplied model instructions take priority. The cover is an illustrative lifestyle or product scene.
Prepare the charging setup
Unpack the supplied USB cable and locate the device charging connection. The current product information lists a 2,000mAh rechargeable battery and does not include a wall plug. Check the manual for the correct charger requirements before connecting a separate plug.
Charge in the conditions described by the manufacturer. Keep the connection accessible and avoid pulling the cable tight. If the charging behaviour differs from the manual or the cable is damaged, stop and ask RelumaHealth for help rather than trying different unverified power supplies.
Reluma Flex Mini Wrap at a glance
| Format | Compact rechargeable wrap |
|---|---|
| Dimensions | 39 Ă— 10 cm |
| Battery | 2,000mAh |
| LEDs | 48 dual-chip LEDs |
| Wavelengths | 660nm red + 850nm near-infrared |
| Charging | USB cable supplied; wall plug not included |
Source: Reluma Flex Mini Red Light Therapy Wrap product information. Check the selected option and supplied manual before use.
Position one wrap, without over-tightening
Once the device is ready for use, identify the LED surface and orient it towards the selected area. Position the wrap in the arrangement shown in the manual. It should sit comfortably, without being used as a rigid brace or tight compression band.
For a wrist or ankle setup, a supported seated position can make careful placement easier. Check the fastening after positioning. Avoid adding improvised straps, folding the LED surface or copying a photograph that shows a different model.
Finish with a simple care check
Use the session settings in the supplied instructions. Keep charging and use arrangements consistent with that manual; do not assume the device can be operated while charging unless the instructions specifically allow it.
After the session, switch off and follow the cleaning directions. Keep the charging connection dry and store the device where the LED surface will not be crushed. Before the next use, check the fabric and connection and confirm that the correct cable is available.
Frequently asked questions
Can I use it while it is charging?
Follow the supplied manual. Do not assume simultaneous charging and use is permitted.
Should I tighten it like a sports brace?
No. Fasten comfortably as instructed. The wrap should not be used to force a joint into position.
Choose a setup that fits
Shop Reluma Flex Mini Wrap — view options →
Compare the RelumaHealth buying guide, or contact our team for help with fit, power or included accessories. Read the current return conditions before ordering.
This is a device-selection and setup guide, not a personalised treatment protocol. Follow the supplied model instructions. Ask an appropriate healthcare professional if you are unsure whether light-device use is suitable for you.